R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

123
Parameters
seconds: Sets the Inform message sending interval in the range of 10 to 86400 seconds.
Examples
# Configure the CPE to send an Inform message every 3600 seconds.
<Sysname> system
[Sysname] cwmp
[Sysname-cwmp] cwmp cpe inform interval 3600
cwmp cpe inform interval enable
Use cwmp cpe inform interval enable to enable periodical sending of Inform messages.
Use undo cwmp cpe inform interval enable to restore the default.
Syntax
cwmp cpe inform interval enable
undo cwmp cpe inform interval enable
Default
Periodical sending of Inform messages is disabled.
Views
CWMP view
Default command level
2: System level
Examples
# Enable periodical sending of Inform messages.
<Sysname> system
[Sysname] cwmp
[Sysname-cwmp] cwmp cpe inform interval enable
cwmp cpe inform time
Use cwmp cpe inform time to configure the CPE to send an Inform message at a specified time.
Use undo cwmp cpe inform time to restore the default.
Syntax
cwmp cpe inform time time
undo cwmp cpe inform time
Default
The CPE is not configured to send an Inform message at a specific time.
Views
CWMP view
Default command level
2: System level