R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

124
Parameters
time: Time at which the CPE sends an Inform message. The specified time must be in the format of
yyyy-mm-ddThh:mm:ss, and in the range of 1970-01-01T00:00:00 to 2105-12-31T23:59:59. The
specified time must be greater than the current system time.
Examples
# Configure the CPE to send an Inform message at 2007-12-01T20:00:00.
<Sysname> system
[Sysname] cwmp
[Sysname-cwmp] cwmp cpe inform time 2007-12-01T20:00:00
cwmp cpe password
Use cwmp cpe password to configure the password used for authentication when the ACS connects to
the CPE.
Use undo cwmp cpe password to restore the default.
Syntax
cwmp cpe password [ cipher | simple ] password
undo cwmp cpe password
Default
No password is configured for connecting to the CPE.
Views
CWMP view
Default command level
2: System level
Parameters
cipher: Specifies a ciphertext password.
simple: Specifies a plaintext password.
password: Specifies the password string. This argument is case sensitive. If simple is specified, it must be
a string of 1 to 255 characters. If cipher is specified, it must be a ciphertext string of 1 to 373 characters.
If neither cipher nor simple is specified, you set a plaintext password string.
Usage guidelines
If you use the command multiple times, the password configured most recently takes effect.
For security purposes, all passwords, including passwords configured in plain text, are saved in cipher
text to the configuration file.
Examples
# Configure the password used for connecting to the CPE as newpsw.
<Sysname> system
[Sysname] cwmp
[Sysname-cwmp] cwmp cpe password newpsw
Related commands
cwmp cpe username