R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

129
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display CWMP status after CWMP is disabled.
<Sysname> display cwmp status
CWMP is disabled.
# Display CWMP status after CWMP is enabled.
<Sysname> display cwmp status
CWMP is enabled.
ACS URL :http://www.acs.com:80/acs
ACS information is set by :user
ACS username :newname
Connection status :disconnected
Data transfer status :none
Time of last successful connection :none
Interval upon to next connection :1096832s
Table 31 Command output
Field Descri
p
tion
ACS URL
URL of the ACS. It is displayed as null if not
configured.
ACS information is set by
Mode through which CWMP gets the ACS URL. It is
displayed as null if ACS URL is not configured.
• user—The ACS URL is configured through CLI.
• config file—The ACS URL is configured through
ACS.
• DHCP—The ACS URL is configured through DHCP.
ACS username
Authentication username for connecting to the ACS. It
is displayed as null if not configured.
Connection status
Connection status:
• connected—The connection is established.
• disconnected—The connection is not established.
• waiting response—The device is waiting for a
response.
Data transfer status
Data transfer status:
• uploading—The device is uploading data.
• downloading—The device is downloading data.
• none—The device is not transferring data.
Time of last successful connection
Time at which the last successful connection was
established. If there is no successful connection, it is
displayed as none.