R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

141
Field Descri
p
tion
1-32 64 96 128 160 192 224
256 288
320 352 384 416 448 480 512
544 576
1024 1536 2048 2560 3072 3584
4096 4608 >4608
Range (1 to 576) of IP packet length (excluding data link layer
header) in bytes. The range increments in the step of 32. For example,
"1-32" shows the number of packets in size of 1 to 32 bytes, and "64"
shows the number of packets in size of 33 to 64 bytes. For the value
greater than 1024, the range increments in the step of 512. For
example, "1536" shows the number of packets in size of 1025 to
1536 bytes. Packets in size of 577 to 1024 are recorded in the 1024
entry.
Protocol Total Streams
Packets/Sec Stream/Sec
Packets/stream Active(sec) /stream
Idle(sec)/stream
Statistics of packet by protocol type in the following counting criteria:
protocol number, total number of flows, number of packets per
second, number of flows per second, number of packets per flow,
active time of each flow, inactive time of each flow.
Type DstIP(Port) SrcIP(Port)
Pro ToS If(Direct) Pkts
Statistics of the active flows in the current cache including flow type,
destination IP address (destination port), source IP address (source
port), protocol, ToS, interface type and name (direction), and the
number of packets.
Flows are classified into the following types: IP flows, L2 flows, IP&L2
flows, MPLS flows with no IP options, and MPLS flows with IP options.
ICMP packets do not contain port number fields, so the type and code
fields are captured. The value for the destination port represents these
two fields. More specifically, the highest 8 bits represent the type field,
and the lowest 8 bits represent the code field. The value for the source
port is set to 0 and does not indicate any statistics.
DstMAC(VLAN) SrcMAC(VLAN)
Layer 2 information about the active flows in the current cache,
including destination MAC address, destination VLAN ID, source
MAC address, and source VLAN ID.
TopLblType(IP/MASK) Lbl-Exp-S-List
Information about the active MPLS flows in the current cache,
including type of the labels at the top of the label stack (IP address and
mask associated with the label), and label list.
A label consists of three fields:
• Label field—20 bits in length.
• Exp field—For QoS, and 3 bits in length.
• S field—1 bit in length. The value of 1 indicates that the label is at
the bottom of the label stack.
Up to three labels can be listed in one label list.
display ip netstream export
Use display ip netstream export to display statistics about NetStream data export.
Syntax
display ip netstream export [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level