R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

145
Field Descri
p
tion
Added stream templates Number of templates that have been created.
The output varies depending on the aggregation mode. The following only describes the fields of AS
aggregation mode:
as outbound template Information about the AS template in the outbound direction.
as inbound template Information about the AS template in the inbound direction.
Packets
Number of packets sent using the template. A packet might contain
multiple flows and different flows might use different templates.
Therefore, the number of packets is in fact the number of flows.
Last template export time Time when the last flow record template was exported.
Field count Total number of fields in a template.
Field type Type of the fields contained in the flow record template.
Field length (byte) Length of the field in byte.
Flows Number of aggregation flows.
Out/In packets Number of sent and received packets.
Out/In bytes Size of sent and received packets in bytes.
First switched System time when the first packet was switched in milliseconds.
Last switched System time when the last packet was switched in milliseconds.
Input SNMP SNMP index of the input interface.
Output SNMP SNMP index of the output interface.
PAD Padding string.
Sampling interval Sampling rate.
enable
Use enable to enable current NetStream aggregation.
Use undo enable to disable current NetStream aggregation.
Syntax
enable
undo enable
Default
No NetStream aggregation is enabled.
Views
NetStream aggregation view
Default command level
3: Manage level
Examples
# Enable NetStream AS aggregation.