R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

146
<Sysname> system-view
[Sysname] ip netstream aggregation as
[Sysname-ns-aggregation-as] enable
Related commands
ip netstream aggregation
ip netstream
Use ip netstream to enable NetStream on a specific interface.
Use undo ip netstream to disable NetStream on the specified interface.
Syntax
ip netstream { inbound | outbound }
undo ip netstream { inbound | outbound }
Default
NetStream is disabled on an interface.
Views
Interface view
Default command level
3: Manage level
Parameters
inbound: Enables NetStream for incoming traffic.
outbound: Enables NetStream for outgoing traffic.
Examples
# Enable NetStream for incoming traffic on interface Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ip netstream inbound
ip netstream aggregation
Use ip netstream aggregation to set a NetStream aggregation mode and to enter the NetStream
aggregation view.
Syntax
ip netstream aggregation { as | destination-prefix | prefix | prefix-port | protocol-port | source-prefix
| tos-as | tos-bgp-nexthop | tos-destination-prefix | tos-prefix | tos-protocol-port | tos-source-prefix }
Views
System view
Default command level
3: Manage level