R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

181
Default
No NQA operation is created.
Views
System view
Default command level
2: System level
Parameters
admin-name: Specifies the name of the administrator creating the NQA operation, a case-insensitive
string of 1 to 32 characters excluding hyphens (-).
operation-tag: Specifies the tag of the operation, a case-insensitive string of 1 to 32 characters excluding
hyphens (-).
all: Removes all NQA operations.
Usage guidelines
If the operation type has been configured for the operation, this command directly places you to NQA
operation view.
You cannot enter the operation view or the operation view of a scheduled NQA operation.
Examples
# Create an NQA operation with administrator name admin and operation tag test, and enter NQA
operation view.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test]
nqa agent enable
Use nqa agent enable to enable the NQA client.
Use undo nqa agent enable to disable the NQA client and stop all the operations being performed.
Syntax
nqa agent enable
undo nqa agent enable
Default
The NQA client is enabled.
Views
System view
Default command level
2: System level
Examples
# Enable the NQA client.
<Sysname> system-view
[Sysname] nqa agent enable