R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

186
Views
FTP operation view
Default command level
2: System level
Parameters
cipher: Sets a ciphertext password.
simple: Sets a plaintext password.
password: Specifies the password used to log in to the FTP server. This argument is case sensitive. If
simple is specified, it must be a plaintext string of 1 to 32 characters. If cipher is specified, it must be a
ciphertext string of 1 to 73 characters. If neither cipher nor simple is specified, you set a plaintext
password.
Usage guidelines
For security purposes, all passwords, including passwords configured in plain text, are saved in cipher
text to the configuration file.
Examples
# Configure the password used for logging in to the FTP server as ftpuser.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] password simple ftpuser
Related commands
• username
• operation
probe count
Use probe count to specify the probe times.
Use undo probe count to restore the default.
Syntax
probe count times
undo probe count
Default
An operation performs one probe.
Views
DHCP operation view, DNS operation view, DLSw operation view, FTP operation view, HTTP operation
view, ICMP echo operation view, SNMP operation view, TCP operation view, UDP echo operation view,
UDP jitter operation view
Default command level
2: System level