R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

12
Group name: groupv3code
Engine ID: 800063A203000FE240A1A6
Storage-type: nonVolatile
UserStatus: active
Table 6 Command output
Field Description
User name SNMP username.
Group name SNMP group name.
Engine ID Engine ID for an SNMP entity.
Storage-type
Storage type:
• volatile.
• nonvolatile.
• permanent.
• readOnly.
• other.
For more information about these storage types, see Table 1.
UserStatus SNMP user status.
Related commands
snmp-agent usm-user v3
enable snmp trap updown
Use enable snmp trap updown to enable link state traps on an interface.
Use undo enable snmp trap updown to disable link state traps on an interface.
Syntax
enable snmp trap updown
undo enable snmp trap updown
Default
Link state traps are enabled.
Views
Interface view
Default command level
2: System level
Usage guidelines
For an interface to generate linkUp/linkDown traps when its state changes, you must also enable the
linkUp/linkDown trap function globally by using the enable snmp trap updown command.
Examples
# Enable port Ethernet 1/1 to send linkUp/linkDown SNMP traps to 10.1.1.1 in the community public.
<Sysname> system-view
[Sysname] snmp-agent trap enable