R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

215
Field Descri
p
tion
UDP-IN Inbound UDP packet statistics.
UDP-OUT Outbound UDP packet statistics.
ICMP-IN Inbound ICMP packet statistics.
ICMP-OUT Outbound ICMP packet statistics.
ip flow-ordering
Use ip flow-ordering to enable IP traffic ordering and specify its mode on an interface.
Use undo ip flow-ordering to restore the default.
Syntax
ip flow-ordering { external | internal }
undo ip flow-ordering
Default
IP traffic ordering is disabled.
Views
Interface view
Default command level
2: System level
Parameters
external: Specifies the interface as an external interface to collect inbound IP traffic ordering statistics.
internal: Specifies the interface as an internal interface to collect both inbound and outbound IP traffic
ordering statistics.
Examples
# Specify interface Ethernet 1/1 as an external interface to collect inbound IP traffic ordering statistics.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname–Ethernet1/1] ip flow-ordering external
ip flow-ordering stat-interval
Use ip flow-ordering stat-interval to set the IP traffic ordering interval.
Use undo ip flow-ordering stat-interval to restore the default.
Syntax
ip flow-ordering stat-interval { 5 | 10 | 15 | 30 | 45 | 60 }
undo ip flow-ordering stat-interval
Default
The IP traffic ordering interval is 10 seconds.