R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

228
PoE configuration commands
PoE is available only for MSR50 routers that are installed with the MPU-G2, and MSR30-16, MSR30-20,
MSR30-40, MSR30-60, MSR50-40, and MSR50-60 routers that are installed with a PoE-capable
switching module.
apply poe-profile
Use apply poe-profile to apply a PoE configuration file to a PoE interface.
Use undo apply poe-profile to remove a PoE configuration file from a PoE interface.
Syntax
apply poe-profile { index index | name profile-name }
undo apply poe-profile { index index | name profile-name }
Views
PoE interface view
Default command level
2: System level
Parameters
index index: Specifies a PoE configuration file by its index number in the range of 1 to 100.
name profile-name: Specifies a PoE configuration file by its name, a string of 1 to 15 characters.
Usage guidelines
The index number, instead of the name, of the PoE configuration file is displayed when you execute the
display this command.
Examples
# Apply the PoE configuration file named forIPphone to PoE interface GigabitEthernet 1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/1
[Sysname-GigabitEthernet1/1] apply poe-profile name forIPphone
[Sysname-GigabitEthernet1/1] display this
#
interface GigabitEthernet1/1
apply poe-profile index 1
#
Return
Related commands
• display poe-profile
• apply poe-profile interface