R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

231
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no interface is specified, this command displays power supplying information for all PoE interfaces.
Examples
# Display power supplying information for GigabitEthernet 1/1.
<Sysname> display poe interface gigabitethernet 1/1
Port Power Enabled : enabled
Port Power Priority : critical
Port Operating Status : on
Port IEEE Class : 1
Port Detection Status : on
Port Power Mode : signal
Port Current Power : 11592 mW
Port Average Power : 11610 mW
Port Peak Power : 11684 mW
Port Max Power : 15400 mW
Port Current : 244 mA
Port Voltage : 51.7 V
Port PD Description : IP Phone For Room 101
Table 49 Command output
Field Description
Port Power Enabled
PoE state:
• enabled.
• disabled.
Port Power Priority
Power priority of the PoE interface:
• critical (highest).
• high.
• low.
Port Operating Status
Operating state of a PoE interface:
• off—PoE is disabled.
• on—Power is supplied for a PoE interface normally.
Port IEEE class PD power class: 0, 1, 2, 3, or 4.