R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

233
Field Description
Priority
Power priority of a PoE interface:
• critical (highest).
• high.
• low.
CurPower Current power of a PoE interface.
Operating Status
Operating state of a PoE interface:
• off—PoE is disabled.
• on—Power is supplied for a PoE interface normally.
IEEE class PD power class defined by IEEE.
Detection Status
Power detection state of a PoE interface:
• disabled—PoE function is disabled.
• searching—PoE interface is searching for the PD.
• on—PoE interface is supplying power for the PD.
• other-fault—There is a fault other than defined in
802.3af.
port(s) on Number of PoE interfaces that are supplying power.
consumed Power consumed by the current PoE interface.
Remaining Total remaining power of the system.
display poe interface power
Use display poe interface power to display power information and settings for PoE interfaces.
Syntax
display poe interface power [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no interface is specified, this command displays power information for all PoE interfaces.