R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

239
Field Description
port(s) on Number of PoE interfaces that are supplying power.
consumed Power consumed by PoE interfaces on the PSE.
Remaining Remaining power on the PSE.
display poe pse interface power
Use display poe pse interface power to display power information and settings for PoE interfaces
connecting to the PSE.
Syntax
display poe pse pse-id interface power [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
pse pse-id: Specifies a PSE ID. To view PSE ID and slot mappings, use the display poe device command.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display power information for PoE interfaces connecting to PSE 1.
<Sysname> display poe pse 1 interface power
Interface CurPower PeakPower MaxPower PD Description
(W) (W) (W)
GE1/25 4.4 4.5 4.6 IP Phone on Room 309 for Peter Smith....
GE1/26 4.4 4.5 15.4 IP Phone on Room 409 for Peter Pan
GE1/27 15.0 15.3 15.4 Acess Point on Room 509 for Peter
GE1/28 0.0 0.0 5.0 IP Phone on Room 609 for Peter John....
GE1/29 0.0 0.0 4.0 IP Phone on Room 709 for Jack
GE1/30 0.0 0.0 5.0 IP Phone on Room 809 for Alien
--- 3 port(s) on, 23.8(W) consumed, 776.2(W) Remaining ---
Table 55 Command output
Field Description
Interface Shortened form of a PoE interface.