R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

240
Field Description
CurPower Current power of a PoE interface.
PeakPower Peak power of a PoE interface.
MaxPower Maximum power of a PoE interface.
PD Description
Description of the PD connected with a PoE interface.
When the description contains more than 34
characters, the first 30 characters followed by four
dots are displayed.
port(s) on Number of PoE interfaces that are supplying power.
consumed Power consumed by all PoE interfaces.
Remaining Remaining power on the PSE.
display poe-power
Use display poe-power to display PoE power Information.
Syntax
display poe-power [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display PoE power information.
<Sysname> display poe-power
PoE Current Power : 1870 W
PoE Average Power : 2100 W
PoE Peak Power : 2350 W
PoE Max Power : 2000 W
PoE Nominal Power : 2500 W
PoE Current Current : 3.00 A
PoE Current Voltage : 55.00 V
PoE Input-threshold Lower : 111.22 V
PoE Input-threshold Upper : 131.00 V
PoE Output-threshold Lower : 45.00 V