R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

244
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about the configurations and applications of the current PoE configuration file
applied to Ethernet 1/1.
<Sysname> display poe-profile interface gigabitethernet 1/1
Poe-profile Index ApplyNum Interface Current Configuration
forIPphone 1 6 GE1/5 poe enable
poe priority critical
Only the configurations that take effect on the interface are displayed because not all the configurations
of a PoE configuration file can be applied successfully. For the descriptions for other fields, see Table 57.
poe disconnect
Use poe disconnect to configure a PD disconnection detection mode.
Use undo poe disconnect to restore the default.
Syntax
poe disconnect { ac | dc }
undo poe disconnect
Default
The default PD disconnection detection mode is ac.
Views
System view
Default command level
2: System level
Parameters
ac: Specifies the PD disconnection detection mode as ac.
dc: Specifies the PD disconnection detection mode as dc.
Usage guidelines
If you change the PD disconnection detection mode while the device is running, the connected PDs are
powered off.
Examples
# Set the PD disconnection detection mode to dc.
<Sysname> system-view
[Sysname] poe disconnect dc
poe enable
Use poe enable to enable PoE on a PoE interface.