R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

245
Use undo poe enable to disable PoE on a PoE interface.
Syntax
poe enable
undo poe enable
Default
PoE is disabled on a PoE interface.
Views
PoE interface view, PoE-profile file view
Default command level
2: System level
Usage guidelines
If a PoE configuration file is already applied to a PoE interface, remove the application of the file to the
PoE interface before configuring the interface in PoE-profile view.
If a PoE configuration file is applied to a PoE interface, remove the application of the file to the PoE
interface before configuring the interface in PoE interface view.
Examples
# Enable PoE on a PoE interface.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] poe enable
# Enable PoE on a PoE interface through a PoE configuration file.
<Sysname> system-view
[Sysname] poe-profile abc
[Sysname-poe-profile-abc-1] poe enable
[Sysname-poe-profile-abc-1] quit
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] apply poe-profile name abc
poe enable pse
Use poe enable pse to enable PoE for the PSE.
Use undo poe enable pse to disable PoE for the PSE.
Syntax
poe enable pse pse-id
undo poe enable pse pse-id
Default
PoE is disabled for the PSE.
Views
System view