R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

246
Default command level
2: System level
Parameters
pse-id: PSE ID.
Examples
# Enable PoE for PSE 1.
<Sysname> system-view
[Sysname] poe enable pse 1
poe legacy enable
Use poe legacy enable to enable the PSE to detect nonstandard PDs.
Use undo poe legacy enable to disable the PSE from detecting nonstandard PDs.
Syntax
poe legacy enable pse pse-id
undo poe legacy enable pse pse-id
Default
The PSE is disabled from detecting nonstandard PDs.
Views
System view
Default command level
2: System level
Parameters
pse pse-id: Specifies a PSE ID.
Examples
# Enable PSE 1 to detect nonstandard PDs.
<Sysname> system-view
[Sysname] poe legacy enable pse 1
poe max-power
Use poe max-power to configure the maximum power for a PoE interface.
Use undo poe max-power to restore the default.
Syntax
poe max-power max-power
undo poe max-power
Default
The maximum power of a PoE interface is 15400 milliwatts.
Views
PoE interface view, PoE-profile file view