R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

247
Default command level
2: System level
Parameters
max-power: Maximum power in milliwatts allocated to a PoE interface. The value range is 1000 to
15400.
Examples
# Set the maximum power of Ethernet 1/1 to 12000 milliwatts.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] poe max-power 12000
# Set the maximum power of Ethernet 1/1 to 12000 milliwatts through a PoE configuration file.
<Sysname> system-view
[Sysname] poe-profile abc
[Sysname-poe-profile-abc-1] poe max-power 12000
[Sysname-poe-profile-abc-1] quit
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] apply poe-profile name abc
poe max-power (system view)
Use poe max-power to configure the maximum power for the PSE.
Use undo poe max-power to restore the default maximum power of the PSE.
Syntax
poe max-power max-power pse pse-id
undo poe max-power pse pse-id
Default
The default maximum power is 247 W for the MIM/FIC 16FSW, and 370 W for the MIM/FIC 24FSW.
Views
System view
Default command level
2: System level
Parameters
max-power: Maximum power in watts of the PSE. The value range is 37 to 480.
pse pse-id: Specifies a PSE ID.
Usage guidelines
To avoid PSE power interruption due to PoE power overload, make sure the sum of power of all PSEs is
less than the maximum PoE power.
The maximum power of the PSE must be greater than or equal to the total maximum power of all critical
PoE interfaces on the PSE to guarantee these PoE interfaces of power.
Examples
# Set the maximum power of PSE 1 to 150 watts.