R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

248
<Sysname> system-view
[Sysname] poe max-power 150 pse 1
Related commands
poe priority pse
poe mode
Use poe mode to configure a PoE mode.
Use undo poe mode to restore the default.
Syntax
poe mode signal
undo poe mode
Default
The device supplies DC power to PDs over signal wires (data pairs).
Views
PoE interface view, PoE-profile file view
Default command level
2: System level
Parameters
signal: Supplies DC power to PDs over data pairs (pins 1, 2 and 3, 6) of category 3/5 twisted pair
cable.
Examples
# Set the PoE mode to signal.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] poe mode signal
# Set the PoE mode to signal by using a PoE configuration file.
<Sysname> system-view
[Sysname] poe-profile abc
[Sysname-poe-profile-abc-1] poe mode signal
[Sysname-poe-profile-abc-1] quit
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] apply poe-profile name abc
poe pd-description
Use poe pd-description to configure a description for the PD that connects to a PoE interface.
Use undo poe pd-description to restore the default.
Syntax
poe pd-description text
undo poe pd-description