R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

253
Use undo poe utilization-threshold to restore the default power alarm threshold of the PSE.
Syntax
poe utilization-threshold utilization-threshold-value pse pse-id
undo poe utilization-threshold pse pse-id
Default
The power alarm threshold for the PSE is 80%.
Views
System view
Default command level
2: System level
Parameters
utilization-threshold-value: Power alarm threshold in percentage, in the range of 1 to 99.
pse pse-id: Specifies a PSE ID.
Usage guidelines
The system sends a trap message when the power utilization exceeds the alarm threshold. If the power
utilization always stays above the alarm threshold, the system does not send any trap message. The
system sends a trap message again when the power utilization drops below the alarm threshold.
Examples
# Set the power alarm threshold of PSE 1 to 90%.
<Sysname> system-view
[Sysname] poe utilization-threshold 90 pse 1
poe-profile
Use poe-profile profile-name to create a PoE configuration file and enter PoE-profile view.
Use undo poe-profile to delete the specified PoE configuration file.
Syntax
poe-profile profile-name [ index ]
undo poe-profile { index index | name profile-name }
Views
System view
Default command level
2: System level
Parameters
profile-name: Name of a PoE configuration file, a string of 1 to 15 characters. A PoE configuration file
name begins with a letter (a through z or A through Z) and must not contain reserved keywords such as
undo, all, name, interface, user, poe, disable, max-power, mode, priority, and enable.
index: Index number of a PoE configuration file, in the range of 1 to 100.