R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

255
Port mirroring configuration commands
display mirroring-group
Use display mirroring-group to display mirroring group information, such as the types, status, and
content of a mirroring group.
Syntax
display mirroring-group { group-id | all | local } [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
group-id: Specifies the number of the mirroring group.
all: Displays all mirroring groups.
local: Displays local mirroring groups.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
The output is sorted by mirroring group numbers.
All MSR routers support this command. The following matrix shows the value ranges for the group-id
argument:
MSR900 MSR93
X
MSR20-1
X
MSR20 MSR30 MSR50 MSR1000
1 to 5 1 to 5 1 to 5 1 to 5 1 to 5 1 to 10 1 to 5
Examples
# Display information about all mirroring groups.
<Sysname> display mirroring-group all
mirroring-group 3:
type: local
status: active
mirroring port:
Ethernet1/1 inbound
Ethernet1/2 both