R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

256
monitor port : Ethernet1/3
Table 58 Command output
Field Descri
p
tion
mirroring-group Number of the mirroring group.
type Type of the mirroring group.
status Status of the mirroring group, active or inactive.
mirroring port Source port.
mirroring-group
Use mirroring-group to create a mirroring group.
Use undo mirroring-group to remove the specified mirroring group or groups.
Syntax
mirroring-group group-id local
undo mirroring-group { group-id | all | local }
Default
No mirroring group exists on a device.
Views
System view
Default command level
2: System level
Parameters
group-id: Specifies the number of the mirroring group.
all: Removes all mirroring groups by using the undo command.
local: Creates a local mirroring group or removes all local mirroring groups with the undo command.
Usage guidelines
All MSR routers support this command. The following matrix shows the value ranges for the group-id
argument:
MSR900 MSR93
X
MSR20-1
X
MSR20 MSR30 MSR50 MSR1000
1 to 5 1 to 5 1 to 5 1 to 5 1 to 5 1 to 10 1 to 5
Examples
# Create a local mirroring group numbered 1.
<Sysname> system-view
[Sysname] mirroring-group 1 local
mirroring-group mirroring-port
Use mirroring-group mirroring-port to configure source ports for a local or remote source group.