R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

261

Default command level

2: System level

Parameters

mirroring-group group-id: Specifies a local or remote destination group by its number. The mirroring

group specified by group-id must already exist. The default value is 1.

Usage guidelines

You cannot configure a source port of an existing mirroring group as a monitor port.

All MSR routers support this command. The following matrix shows the value ranges for the group-id

argument:

MSR900 MSR93

MSR20-1

MSR20

MSR30

MSR50 MSR1000

1 to 5 1 to 5 1 to 5 1 to 5 1 to 5 1 to 10 1 to 5

Examples

# Create local mirroring group 1, and configure Ethernet 1/1 as its monitor port.

<Sysname> system-view

[Sysname] mirroring-group 1 local

[Sysname] interface ethernet 1/1

[Sysname-Ethernet1/1] monitor-port

Related commands

mirroring-group