R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

263
Information center configuration commands
The following matrix shows the FIPS and hardware compatibility:
Hardware FIPS mode
MSR900 No.
MSR93X No.
MSR20-1X No.
MSR20 Yes.
MSR30 Yes except on MSR30-16.
MSR50 Yes.
MSR1000 Yes.
display channel
Use display channel to display channel information.
Syntax
display channel [ channel-number | channel-name ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
channel-number: Specifies a channel by its number in the range of 0 to 9.
channel-name: Specifies a channel by its name, a default name or a self-defined name. For information
about how to a channel name, see info-center channel name.
Table 59 Information channels for different output destinations
Out
p
ut destination Information channel number Default channel name
Console 0 console
Monitor terminal 1 monitor
Log host 2 loghost
Trap buffer 3 trapbuffer
Log buffer 4 logbuffer
SNMP module 5 snmpagent
Web interface 6 channel6
Log file 9 channel9