R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

266
display logfile status
Use display logfile status to display the state of the log file feature on MSR20-1X routers.
Syntax
display logfile status
Views
Any view
Default command level
1: Monitor level
Parameters
None
Usage guidelines
The following matrix shows the command and router compatibility:
Command MSR900 MSR93X MSR20-1X MSR20 MSR30 MSR50 MSR1000
display logfile
status
No. No. Yes. No. No. No. No.
Examples
# Display the status of the log file feature.
<Sysname> display logfile status
Current Log File Status: disable
Next reboot Log File Status: enable
The output shows that the log file feature is disabled and will be enabled at the next reboot.
Related commands
logfile enable
display logbuffer
Use display logbuffer to display the state of the log buffer and the log information in the log buffer.
Without size buffersize, the command displays all log information in the log buffer.
Syntax
display logbuffer [ reverse ] [ level severity | size buffersize ] * [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level