R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

276
channel-name: Specifies a channel by its name, a default name or a self-defined name. For information
about how to a channel name, see info-center channel name.
Usage guidelines
The info-center console channel command takes effect only when the information center has been
enabled with the info-center enable command.
Examples
# Specify the console output channel as channel 0.
<Sysname> system-view
[Sysname] info-center console channel 0
info-center enable
Use info-center enable to enable the information center.
Use undo info-center enable to disable the information center.
Syntax
info-center enable
undo info-center enable
Default
The information center is enabled.
Views
System view
Default command level
2: System level
Usage guidelines
The device can output system information only after the information center is enabled.
Examples
# Enable the information center.
<Sysname> system-view
[Sysname] info-center enable
Info: Information center is enabled.
info-center format unicom
Use info-center format unicom to set the UNICOM format for system information sent to a log host.
Use undo info-center format to restore the default.
Syntax
info-center format unicom
undo info-center format
Default
The format for the system information sent to a log host is HP.