R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

278
info-center logfile enable
Use info-center logfile enable to enable the log file feature.
Use undo info-center logfile enable to disable the log file feature.
Syntax
info-center logfile enable
undo info-center logfile enable
Default
The log file feature is enabled.
Views
System view
Default command level
2: System level
Usage guidelines
The following matrix shows the command and router compatibility:
Command MSR900 MSR93X MSR20-1X MSR20 MSR30 MSR50
MSR10
00
Info-center
logfile enable
Yes. Yes. No. Yes. Yes. Yes. Yes.
Examples
# Enable the log file feature.
<Sysname> system-view
[Sysname] info-center logfile enable
info-center logfile frequency
Use info-center logfile frequency to configure the interval for saving system information to the log file.
Use undo info-center logfile frequency to restore the default interval.
Syntax
info-center logfile frequency freq-sec
undo info-center logfile frequency
Views
System view
Default command level
2: System level
Parameters
freq-sec: Specifies the saving interval in the range of 1 to 86400 seconds.