R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

284
Views
System view
Default command level
2: System level
Parameters
usage: Specifies an alarm threshold. The value must be an integer in the range of 1 to 100.
Usage guidelines
When the size of the security log file reaches the upper limit, the system deletes the oldest information
and then writes the new information into the security log file buffer. This feature can avoid security log
loss by setting an alarm threshold. When the threshold is reached, the system outputs log information to
inform the administrator. The administrator can log in to the device as the security log administrator, and
back up the security log file.
The following matrix shows the command and router compatibility:
Command MSR900 MSR93X MSR20-1X MSR20 MSR30 MSR50 MSR1000
info-center
security-logfile
alarm-threshold
Yes. Yes. No. Yes. Yes. Yes. Yes.
Examples
# Set the alarm threshold for security log file usage to 90%.
<Sysname> system-view
[Sysname] info-center security-logfile alarm-threshold 90
Related commands
info-center security-logfile size-quota
info-center security-logfile enable
Use info-center security-logfile enable to enable the saving of the security logs into the security log file.
Use undo info-center security-logfile enable to restore the default.
Syntax
info-center security-logfile enable
undo info-center security-logfile enable
Default
The saving of security logs into the security log file is disabled.
Views
System view
Default command level
2: System level