R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

286
Examples
# Save security logs to the security log file every 600 seconds.
<Sysname> system-view
[Sysname] info-center security-logfile frequency 600
Related commands
info-center security-logfile enable
info-center logfile overwrite-protection
Use info-center logfile overwrite-protection to enable log file overwrite-protection. When the last log file
is full or the storage device runs out of space, the device stops saving logs into the log files.
Use undo info-center logfile overwrite-protection to disable log file overwrite-protection. When the last
log file is full or the storage device runs out of space, the device deletes the earliest log file and creates
a new one to save new logs.
Syntax
info-center logfile overwrite-protection [ all-port-powerdown ]
undo info-center logfile overwrite-protection
Default
Log file overwrite-protection is disabled.
Views
System view
Default command level
2: System level
Parameters
all-port-powerdown: Shuts down all the service ports on the device when the last log file is full or the
storage device runs out of space.
Usage guidelines
This command is supported only in FIPS mode. For information about
Examples
# Enable log file overwrite-protection.
<Sysname> system-view
[Sysname] info-center logfile overwrite-protection
info-center security-logfile size-quota
Use info-center security-logfile size-quota to set the maximum storage space reserved for the security log
file.
Use undo info-center security-logfile size-quota to restore the default.
Syntax
info-center security-logfile size-quota size
undo info-center security-logfile size-quota