R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

292
The current configuration will be written to the device. Are you sure? [Y/N]:
At this time, the system receives the log information. It displays the log information first and then displays
[Y/N].
%May 21 14:33:19:425 2007 Sysname SHELL/4/LOGIN: VTY login from 192.168.1.44
[Y/N]:
Enter Y or N to complete your input.
info-center syslog channel
Use info-center syslog channel to configure the Web output channel. The system uses this channel to
output information to the Web interface.
Use undo info-center syslog channel to restore the default.
Syntax
info-center syslog channel { channel-number | channel-name }
undo info-center syslog channel
Default
The default Web output channel is channel 6.
Views
System view
Default command level
2: System level
Parameters
channel-number: Specifies a channel by its number in the range of 0 to 9.
channel-name: Specifies a channel by its name, a default name or a self-defined name. For information
about how to a channel name, see info-center channel name.
Examples
# Output system information to the Web interface through channel 7.
<Sysname> system-view
[Sysname] info-center syslog channel 7
info-center timestamp
Use info-center timestamp to configure the timestamp format for system information sent to all
destinations except the log host.
Use undo info-center timestamp to restore the default.
Syntax
info-center timestamp { debugging | log | trap } { boot | date | none }
undo info-center timestamp { debugging | log | trap }
Default
The timestamp format for system information is date.