R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

317
Field Descri
p
tion
Version 9 exported UDP datagram
number (failed)
Number of UDP packets that failed to be sent.
AS aggregation export information
The output varies depending on the aggregation mode. The
following only describes the fields of AS aggregation mode.
display ipv6 netstream template
Use display ipv6 netstream template to display configuration and status information about IPv6
NetStream templates.
Syntax
display ipv6 netstream template [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about IPv6 NetStream templates.
<Sysname> display ipv6 netstream template
Stream template refresh-rate packet : 20
Stream template refresh-rate time(in minute) : 30
Active stream templates : 2
Added stream templates : 2
IPv6 outbound template:
Template ID : 3305
Packets : 0
Last template export time : Never
Field count : 27
Field type Field length (byte)
---------------------------------------------------------------------------
Out packets 8
Out bytes 8
First switched 4
Last switched 4
Input SNMP 4