R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

24
Use undo snmp-agent trap enable to disable traps globally.
Syntax
snmp-agent trap enable [ acfp [ client | policy | rule | server ] | bfd | bgp | configuration |
default-route | flash | fr | isdn [ call-clear | call-setup | lapd-status ] | mpls | ospf [ process-id ]
[ ifauthfail | ifcfgerror | ifrxbadpkt | ifstatechange | iftxretransmit | lsdbapproachoverflow |
lsdboverflow | maxagelsa | nbrstatechange | originatelsa | vifcfgerror | virifauthfail | virifrxbadpkt
| virifstatechange | viriftxretransmit | virnbrstatechange ] * | pim [ candidatebsrwinelection |
electedbsrlostelection | interfaceelection | invalidjoinprune | invalidregister | neighborloss |
rpmappingchange ] * | posa | standard [ authentication | coldstart | linkdown | linkup |
wa
rmstart ]* | system | voice dial | vrrp [ authfailure | newmaster ] | wlan ]
undo snmp-agent trap enable [ acfp [ client | policy | rule | server ] | bfd | bgp | configuration |
default-route | flash | fr | isdn [ call-clear | call-setup | lapd-status ] | mpls | ospf [ process-id ]
[ ifauthfail | ifcfgerror | ifrxbadpkt | ifstatechange | iftxretransmit | lsdbapproachoverflow |
lsdboverflow | maxagelsa | nbrstatechange | originatelsa | vifcfgerror | virifauthfail | virifrxbadpkt
| virifstatechange | viriftxretransmit | virnbrstatechange ] * | pim [ candidatebsrwinelection |
electedbsrlostelection | interfaceelection | invalidjoinprune | invalidregister | nei
ghborloss |
rpmappingchange ] * | posa | standard [ authentication | coldstart | linkdown | linkup |
warmstart ]* | system | voice dial | vrrp [ authfailure | newmaster ] | wlan ]
Default
Traps are enabled for all modules except for the voice module.
Views
System view
Default command level
3: Manage level
Parameters
acfp: Enables SNMP traps for the ACFP module.
• client: ACFP client traps.
• policy: ACFP policy traps.
• rule: ACFP rule traps.
• server: ACFP server traps.
bfd: Enables SNMP traps for the BFD module.
bgp: Enables SNMP traps for the BGP module.
configuration: Enables configuration traps.
default-route: Enables default route traps, which are sent when default routes are deleted.
flash: Enables Flash-related SNMP traps.
fr: Enables SNMP traps for Frame Relay virtual link change events.
isdn: Enables SNMP traps for the ISDN module.
• call-clear: Call clear traps, which are sent when an ISDN call is cleared.
• call-setup: Call setup traps, which are sent when an ISDN call is set up.
• lapd-status: ISDN link change traps.
mpls: Enables SNMP traps for the MPLS module.