R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

327
# Set the maximum entries in the cache to 5000.
<Sysname> system-view
[Sysname] ipv6 netstream max-entry 5000
ipv6 netstream timeout active
Use ipv6 netstream timeout active to set the aging timer for active flows. This timer applies to only
NetStream traditional data flows.
Use undo ipv6 netstream timeout active to restore the default.
Syntax
ipv6 netstream timeout active minutes
undo ipv6 netstream timeout active
Default
The aging timer is 30 minutes for active flows.
Views
System view
Default command level
3: Manage level
Parameters
minutes: Sets the aging timer in minutes for active flows, in the range of 1 to 60.
Usage Guidelines
You can configure both the aging timer for active flows and the aging timer for inactive flows. When
either timer for a flow expires, the flow is aged out. The time precision is 10 seconds.
Examples
# Set the aging timer to 60 minutes for active flows.
<Sysname> system-view
[Sysname] ipv6 netstream timeout active 60
Related commands
ipv6 netstream timeout inactive
ipv6 netstream timeout inactive
Use ipv6 netstream timeout inactive to set the aging timer for inactive flows. This timer applies to only
NetStream traditional data flows.
Use undo ipv6 netstream timeout inactive to restore the default.
Syntax
ipv6 netstream timeout inactive seconds
undo ipv6 netstream timeout inactive
Default
The aging timer is 30 seconds for inactive flows.