R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

Peer dispersion: 0.00 ms

Reference time: 00:00:00.000 UTC Jan 1 1900(00000000.00000000)

Table 16 Command output

Field Description

Clock status

Status of the system clock:

• Synchronized—The system clock has been synchronized.

• Unsynchronized—The system clock has not been

synchronized.

Clock stratum Stratum level of the system clock.

Reference clock ID

When the system clock is synchronized to a remote time server,

this field indicates the address of the remote time server. When

the system clock is synchronized to a local reference source, this

field indicates the address of the local clock source:

• When the local clock has a stratum level of 1, the value of this

field is LOCL.

• When the stratum of the local clock has another value, the

value of this field is the IP address of the local clock.

Nominal frequency Nominal frequency of the local system hardware clock, in Hz.

Actual frequency Actual frequency of the local system hardware clock, in Hz.

Clock precision Precision of the system clock.

Clock offset

Offset of the system clock relative to the reference source, in

milliseconds.

Root delay

Roundtrip delay from the local device to the primary reference

source, in milliseconds.

Root dispersion

Maximum error of the system clock relative to the primary

reference source, in milliseconds.

Peer dispersion

Maximum error of the system clock relative to the reference

source, in milliseconds.

Reference time Reference timestamp.

display ntp-service trace

Use display ntp-service trace to display brief information about each NTP server from the local device

back to the primary reference source.

Syntax

display ntp-service trace [ | { begin | exclude | include } regular-expression ]

Views

Any view

Default command level

1: Monitor level