R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

73
Status: Enabled, Pkts Snd: 1, Pkts Rvd: 1, Pkts Err: 0
Table 18 Command output
Field Descri
p
tion
Neighbor Discovery Protocol is enabled NDP is enabled globally on the current device.
Neighbor Discovery Protocol Ver Version of NDP.
Hello Timer Interval to send NDP packets.
Aging Timer Time for the receiving device to hold NDP information.
Interface Specified port.
Status NDP state of a port.
Pkts Snd Number of the NDP packets sent through the port.
Pkts Rvd Number of the NDP packets received on the port.
Pkts Err
Number of the error NDP packets received on the
port.
Neighbor 1: Aging Time
Aging time of the NDP information of a neighbor
device.
MAC Address MAC address of a neighbor device.
Host Name System name of a neighbor device.
Port Name Port name of a neighbor device.
Software Ver Software version of the neighbor device.
Device Name Device model of a neighbor device.
Port Duplex Port duplex mode of a neighbor device.
Product Ver Product version of a neighbor device.
BootROM Ver Boot ROM version of a neighbor device.
ndp enable
Use ndp enable to enable NDP globally or for specified ports.
Use undo ndp enable to disable this feature globally or for specified ports.
Syntax
In Ethernet interface view or Layer 2 aggregate interface view:
ndp enable
undo ndp enable
In system view:
ndp enable [ interface interface-list ]
undo ndp enable [ interface interface-list ]
Default
NDP is enabled globally and also on all ports.