R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

76
Syntax
reset ndp statistics [ interface interface-list ]
Views
User view
Default command level
1: Monitor level
Parameters
interface interface-list: Specifies an Ethernet port list, which can contain multiple Ethernet ports. The
interface-list argument is in the format of interface-list = { interface-type interface-number [ to
interface-type interface-number ] } & <1-10>, where interface-type represents the port type,
interface-number represents the port number, and & <1-10> means that you can provide up to 10 port
indexes/port index lists for this argument. If you specify this option, NDP statistics of the specified port
are cleared. Otherwise, NDP statistics of all ports are cleared.
Examples
# Clear NDP statistics of all ports.
<Sysname> reset ndp statistics
NTDP configuration commands
display ntdp
Use display ntdp to display the NTDP configuration.
Syntax
display ntdp [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the NTDP configuration.
<Sysname> display ntdp
NTDP is running.
Hops : 4