R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

77
Timer : 1 min
Hop Delay : 100 ms
Port Delay: 10 ms
Last collection total time: 92ms
Table 19 Command output
Field Descri
p
tion
NTDP is running NTDP is enabled globally on the local device.
Hops Hop count for topology collection.
Timer Interval to collect topology information (after the cluster is created).
disable
Device is not a management device and unable to perform periodical
topology collection.
Hop Delay Delay time for the device to forward topology collection requests.
Port Delay
Delay time for a topology-collection request to be forwarded through a
port.
Last collection total time Time cost during the last topology collection.
display ntdp device-list
Use display ntdp device-list to display device information collected through NTDP.
Syntax
display ntdp device-list [ verbose ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
verbose: Displays the detailed device information collected through NTDP.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
The information displayed may not be that of the latest device if you do not execute the ntdp explore
command before using this command.
Examples
# Display device information collected through NTDP.
<Sysname> display ntdp device-list