R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

81
Field Descri
p
tion
Administrator MAC MAC address of the management device.
Peer Hostname Host name of a neighbor device.
Peer MAC MAC address of a neighbor device.
Peer Port ID Name of the peer port connected to the local port.
Native Port ID Name of the local port to which a neighbor device is connected.
Speed Speed of the local port to which a neighbor device is connected.
Duplex
Duplex mode of the local port to which a neighbor device is
connected.
ntdp enable
Use ntdp enable to enable NTDP globally or for specified ports.
Use undo ntdp enable to disable NTDP globally or for specified ports.
Syntax
ntdp enable
undo ntdp enable
Default
NTDP is enabled globally and on all ports.
Views
System view, Ethernet interface view, Layer 2 aggregate interface view
Default command level
2: System level
Usage guidelines
Executed in system view, the command enables the global NTDP. Executed in interface view, the
command enables NTDP of the current port.
Configured in Layer 2 aggregate interface view, the configuration does not take effect on the member
ports of the aggregation group that corresponds to the aggregate interface. Configured on a member
port of an aggregation group, the configuration takes effect only after the member port quits the
aggregation group. For more information about link aggregation, see Layer 2—LAN Switching
Configuration Guide.
Examples
# Enable NTDP globally.
<Sysname> system-view
[Sysname] ntdp enable
# Enable NTDP for port Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ntdp enable