R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

82
ntdp explore
Use ntdp explore to start topology information collection.
Syntax
ntdp explore
Views
User view
Default command level
2: System level
Examples
# Start topology information collection.
<Sysname> ntdp explore
ntdp hop
Use ntdp hop to set maximum hop count for collecting topology information.
Use undo ntdp hop to restore the default.
Syntax
ntdp hop hop-value
undo ntdp hop
Default
The maximum hop count is 3.
Views
System view
Default command level
2: System level
Parameters
hop-value: Sets the maximum hop count for collecting topology information, in the range of 1 to 16.
Usage guidelines
This command is only applicable to the topology-collecting device. A larger hop count requires more
memory of the topology-collecting device.
Examples
# Set the hop count for topology information collection to 5.
<Sysname> system-view
[Sysname] ntdp hop 5
ntdp timer
Use ntdp timer to configure the interval to collect topology information.
Use undo ntdp timer to restore the default.