R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

84
<Sysname> system-view
[Sysname] ntdp timer hop-delay 300
ntdp timer port-delay
Use ntdp timer port-delay to set the delay time for a device to forward a received topology-collection
request through its successive ports.
Use undo ntdp timer port-delay to restore the default delay time.
Syntax
ntdp timer port-delay delay-time
undo ntdp timer port-delay
Default
The delay time for a device to forward a received topology-collection request through its successive ports
is 20 ms.
Views
System view
Default command level
2: System level
Parameters
delay-time: Delay time (in milliseconds) for a device to forward a topology-collection request through its
successive ports, in the range of 1 to 100.
Examples
# Set the delay time for the device to forward topology-collection requests through the successive ports
to 40 ms.
<Sysname> system-view
[Sysname] ntdp timer port-delay 40
Cluster configuration commands
add-member
Use add-member to add a candidate device to a cluster.
Syntax
add-member [ member-number ] mac-address mac-address [ password password ]
Views
Cluster view
Default command level
2: System level
Parameters
member-number: A number assigned to the candidate device to be added to a cluster. Its value range
varies with router models, as follows: