R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

89
you replace the cluster name with the one you specify (suppose the new cluster name differs from the
original one).
The number of the management device in the cluster is 0.
Examples
# Configure the current device as a management device and specify the cluster name as aaa.
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster] build aaa
[Sysname-cluster] ip-pool 172.16.0.1 255.255.255.248
Restore topology from local flash file,for there is no base topology.
(Please confirm in 30 seconds, default No). (Y/N)
Y
Begin get base topology file from local flash......
Get file error, can not finish base topology recover
#Sep 18 19:56:03:804 2006 Sysname IFNET/4/INTERFACE UPDOWN:
Trap 1.3.6.1.6.3.1.1.5.4: Interface 3276899 is Up, ifAdminStatus is 1, ifOperSt
atus is 1
#Sep 18 19:56:03:804 2006 Sysname CLST/4/Cluster_Trap:
OID:1.3.6.1.4.1.2011.6.7.1.0.3: member 0.0.0.0.0.224.252.0.29.0 role change, NTD
PIndex:0.0.0.0.0.0.224.252.0.29.0, Role:1
%Sep 18 19:56:03:804 2006 Sysname IFNET/4/UPDOWN:
Line protocol on the interface Vlan-interface100 is UP
[aaa_0.Sysname-cluster]
%Sep 18 19:56:18:782 2006 Sysname CLST/4/LOG:
Member 00e0-fc00-1e00 is joined in cluster aaa.
[aaa_0.Sysname-cluster]
cluster
Use cluster to enter cluster view.
Syntax
cluster
Views
System view
Default command level
2: System level
Examples
# Enter cluster view
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster]