R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

90
cluster enable
Use cluster enable to enable the cluster function.
Use undo cluster enable to disable the cluster function.
Syntax
cluster enable
undo cluster enable
Default
The cluster function is enabled.
Views
System view
Default command level
2: System level
Usage guidelines
When you execute the undo cluster enable command on a management device, you remove the cluster
and its members, prevent the device from functioning as a management device, and disable the cluster
function on the device
When you execute the undo cluster enable command on a member device, you disable the cluster
function on the device, and the device leaves the cluster.
When you execute the undo cluster enable command on a device that belongs to no cluster, you disable
the cluster function on the device.
Examples
# Enable the cluster function.
<Sysname> system-view
[Sysname] cluster enable
cluster switch-to
Use cluster switch-to to switch between the management device and member devices.
Syntax
cluster switch-to { member-number | mac-address mac-address | administrator | sysname
member-sysname }
Views
User view
Default command level
0: Visit level
Parameters
member-number: Specifies the number of a member device in a cluster. Its value range varies with router
models, as follows: