R2511-HP MSR Router Series Network Management and Monitoring Configuration Guide(V5)

117
Ste
p
Command Remarks
8. Specify the TTL for probe
packets.
ttl value
Optional.
20 by default.
This setting is not available for the
DHCP operation.
9. Specify the ToS value in the IP
packet header of probe
packets.
tos value
Optional.
0 by default.
This setting is not available for the
DHCP operation.
10. Enable the routing table
bypass function.
route-option bypass-route
Optional.
Disabled by default.
This setting is not available for the
DHCP operation.
Configuring the collaboration function
Collaboration is implemented by associating a reaction entry of an NQA operation a track entry. The
reaction entry monitors the NQA operation. If the number of operation failures reaches the specified
threshold, the configured action is triggered.
To configure the collaboration function:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create an NQA operation
and enter NQA operation
view.
nqa entry admin-name
operation-tag
By default, no NQA operation is
created.
3. Specify an NQA operation
type and enter its view.
type { dhcp | dlsw | dns | ftp |
http | icmp-echo | snmp | tcp |
udp-echo }
The collaboration function is not
available for the UDP jitter and
voice operations.
4. Configure a reaction entry.
reaction item-number
checked-element probe-fail
threshold-type consecutive
consecutive-occurrences
action-type trigger-only
Not configured by default.
You cannot modify the content of
an existing reaction entry.
5. Exit to system view.
quit N/A
6. Associate Track with NQA.
See High Availability
Configuration Guide.
N/A
7. Associate Track with an
application module.
See High Availability
Configuration Guide.
N/A
Configuring threshold monitoring
Introduction
1. Threshold types