R2511-HP MSR Router Series Network Management and Monitoring Configuration Guide(V5)

144
Figure 50 Network diagram
Configuration procedure
1. Configure IP traffic ordering:
# Enable IP traffic ordering on Ethernet 1/1 and specify the interface as an internal interface to
collect statistics.
<Device> system-view
[Device] interface ethernet 1/1
[Device-Ethernet1/1] ip address 192.168.1.4 24
# Set the statistics interval to 30 seconds.
[Device-Ethernet1/1] quit
[Device] ip flow-ordering stat-interval 30
2. Display IP traffic ordering statistics.
[Device-Ethernet1/1] display ip flow-ordering statistic internal
Unit: kilobytes/second
User IP TOTAL IN TOTAL OUT TCP-IN TCP-OUT UDP-IN UDP-OUT ICMP-IN ICMP-OUT
192.168.1.1 0.2 0.1 0.1 0.1 0.0 0.0 0.1 0.0
192.168.1.2 0.1 0.0 0.1 0.0 0.0 0.0 0.0 0.0
192.168.1.3 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0