R2511-HP MSR Router Series Network Management and Monitoring Configuration Guide(V5)

182
Hardware FIPS mode
MSR50 Yes.
MSR1000 Yes.
Information center configuration task list
Task Remarks
Outputting system information to the console Optional.
Outputting system information to the monitor terminal Optional.
Outputting system information to a log host Optional.
Outputting system information to the trap buffer Optional.
Outputting system information to the log buffer Optional.
Outputting system information to the SNMP module Optional.
Outputting system information to the Web interface Optional.
Saving system information to a log file Optional.
Managing security logs Optional.
Enabling synchronous information output Optional.
Disabling an interface from generating link up/down logging information Optional.
Configurations for the information output destinations function independently.
Outputting system information to the console
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable the information center.
info-center enable
Optional.
Enabled by default.
3. Name the channel with a
specified channel number.
info-center channel
channel-number name
channel-name
Optional.
See Table 6 for
default channel
names.
4. Configure an output channel
for the console.
info-center console channel
{ channel-number |
channel-name }
Optional.
By default, system information is
output to the console through
channel 0 (console).
5. Configure an output rule for
the console.
info-center source { module-name |
default } channel { channel-number
| channel-name } [ debug { level
severity | state state } * | log { level
severity | state state } * | trap
{ level severity | state state } * ] *
Optional.
See "Default output rules of system
information."