R2511-HP MSR Router Series Network Management and Monitoring Configuration Guide(V5)

185
Ste
p
Command Remarks
6. Configure the timestamp
format for system
information output to the
log host.
info-center timestamp loghost { date
| iso | no-year-date | none }
Optional.
date by default.
7. Set the format of the
system information sent
to a log host.
• Set the format to UNICOM:
info-center format unicom
• Set the format to HP:
undo info-center format
Optional.
HP by default.
8. Specify a log host and
configure related
parameters.
info-center loghost [ vpn-instance
vpn-instance-name ]
{ host-ipv4-address | ipv6
host-ipv6-address } [ port
port-number ] [ channel
{ channel-number | channel-name }
| facility local-number ] *
By default, no log host or related
parameters are specified.
If no channel is specified when
outputting system information to a log
host, the system uses channel 2
(loghost) by default.
The value of the port-number argument
must be the same as the value
configured on the log host. Otherwise,
the log host cannot receive system
information.
Outputting system information to the trap buffer
The trap buffer only receives trap information, and discards log and debug information.
To output system information to the trap buffer:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable the information center.
info-center enable
Optional.
Enabled by default.
3. Name the channel with a
specified channel number.
info-center channel
channel-number name
channel-name
Optional.
See Table 6 for
default channel
names.
4. Configure an output channel
for the trap buffer and set the
buffer size.
info-center trapbuffer [ channel
{ channel-number |
channel-name } | size buffersize ]
*
Optional.
By default, system information is
output to the trap buffer through
channel 3 (known as trapbuffer)
and the default buffer size is 256.
5. Configure an output rule for
the trap buffer.
info-center source { module-name |
default } channel { channel-number
| channel-name } [ debug { level
severity | state state } * | log { level
severity | state state } * | trap
{ level severity | state state } * ] *
Optional.
See "Default output rules of system
informati
on."