R2511-HP MSR Router Series Network Management and Monitoring Configuration Guide(V5)

59
Task Remarks
• Configuring communication between the management device and the
member devices within a cluster
Optional.
• Configuring cluster management protocol packets
Optional.
• Cluster member management
Optional.
Configuring the member devices:
• Enabling NDP
Required.
• Enabling NTDP
Required.
• Manually collecting topology information
Optional.
• Enabling the cluster function
Required.
• Deleting a member device from a cluster
Optional.
Toggling between the CLIs of the management device and a member device Optional.
Adding a candidate device to a cluster Optional.
Configuring advanced cluster functions:
• Configuring topology management
Optional.
• Configuring interaction for a cluster
Optional.
• Configuring the SNMP configuration synchronization function
Optional.
• Configuring Web user accounts in batches
Optional.
Configuring the management device
Perform the tasks in this section on the management device.
Enabling NDP globally and for specific ports
For NDP to work correctly, enable NTDP both globally and on specific ports.
To enable NDP globally and for specific ports:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable NDP globally.
ndp enable
Optional.
By default, this function is
enabled.
3. Enable the NDP feature
on ports.
• In system view:
ndp enable interfaceinterface-list
• In Ethernet interface view or Layer 2
aggregate interface view:
a. interface interface-type
interface-number
b. ndp enable
Use either command.
By default, NDP is enabled
globally and also on all ports.
To avoid the management
device collecting unnecessary
topology data, disable NDP on
ports connected to
non-candidate devices.