R2511-HP MSR Router Series Network Management and Monitoring Configuration Guide(V5)

64
• If the interval for sending MAC address negotiation broadcast packets is 0, the system
automatically sets it to 1 minute.
• If the interval for sending MAC address negotiation broadcast packets is not 0, the interval remains
unchanged.
To configure the destination MAC address of the cluster management protocol packets:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter cluster view.
cluster N/A
3. Configure the destination
MAC address for cluster
management protocol
packets.
cluster-mac mac-address
The destination MAC address is
0180-C200-000A by default.
4. Configure the interval to send
MAC address negotiation
broadcast packets.
cluster-mac syn-interval interval
Optional.
The default setting is 1 minute.
Cluster member management
You can manually add a candidate device to a cluster, or remove a member device from a cluster.
If a member device needs to be rebooted for software upgrade or configuration update, you can
remotely reboot it through the management device.
Adding a member device
Ste
p
Command
1. Enter system view.
system-view
2. Enter cluster view.
cluster
3. Add a candidate device to the cluster.
add-member [ member-number ] mac-address
mac-address [ password password ]
Removing a member device
Ste
p
Command
1. Enter system view.
system-view
2. Enter cluster view.
cluster
3. Remove a member device from the cluster.
delete-member member-number [ to-black-list ]
Rebooting a member device
Ste
p
Command
1. Enter system view.
system-view
2. Enter cluster view.
cluster
3. Reboot a specified member device.
reboot member { member-number | mac-address
mac-address } [ eraseflash ]