R2511-HP MSR Router Series Network Management and Monitoring Configuration Guide(V5)

70
Task Command
Remarks
Display information about
cluster members.
display cluster members [ member-number
| verbose ] [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Clear NDP statistics. reset ndp statistics [ interface interface-list ] Available in user view.
Cluster management configuration example
Network requirements
• Three devices form cluster abc, whose management VLAN is VLAN 10. In the cluster, Device B
serves as the management device (Administrator), whose network management interface is
VLAN-interface 2; Device A and Device C are the member devices (Member).
• All the devices in the cluster use the same FTP server and TFTP server on host 63.172.55.1/24, and
use the same SNMP NMS and log services on host IP address: 69.172.55.4/24.
• Add the device whose MAC address is 00E0-FC01-0013 to the blacklist.
Figure 27 Network diagram
Configuration procedure
1. Configure the member device Device A:
# Enable NDP globally and for port Ethernet 1/1.
<DeviceA> system-view
[DeviceA] ndp enable
[DeviceA] interface ethernet 1/1
[DeviceA-Ethernet1/1] ndp enable
[DeviceA-Ethernet1/1] quit
# Enable NTDP globally and for port Ethernet 1/1.
[DeviceA] ntdp enable
[DeviceA] interface ethernet 1/1